Powers e430 Series Master Mixing Valves - Retrofit Bedienungsanleitung PDF herunterladen

430 RETROFIT INSTRUCTIONS

1. Turn off recirculation pump if used. Close both check-

stops by rotating stems counter-clockwise with an allen

wrench. Open a faucet on the tempered water line, and

ensure water is completely off. If water continues to

flow through the valve, checkstops may be damaged.

In that case, locate another shutoff valve, and turn

water off to the valve.

2. Remove the four (4) screws on the motor housing cap,

and lift the motor housing/cap adjustment knob

assembly from the valve.

Note: Depending on your

system, a considerable amount of water may drain

back from your pipes when you remove the cap.

3. Remove the motor from the adjustment knob,

and discard.

4. Place the "O" ring on the stem of the new overload

assembly. Grease the stem of the overload assembly,

and insert it into the adjustment knob.

5. Loosen the union nuts between the checkstops and the

valve body. Remove the four (4) bolts that hold the

motor housing to the valve body. Carefully remove the

valve body. Remove and discard the old overload

assembly.

6. Inspect the valve assembly. Insure the components are

in good shape, clean, and free of debris. Replace pop-

pet assemblies if necessary (available separately).

7. Install the "O" ring onto the motor adapter and assemble

it to the hot water poppet.

8. Install the "O" ring onto the funnel.

431/432 - Grease the "O" ring, and insert the funnel

into the motor housing. Two legs should be in diagonal

position.

433/434 - Grease the “O” ring, and insert the funnel into

the lower housing.

INSTALLATION INSTRUCTIONS

HYDROGUARD SERIES e430

Retrofit

“O” Ring

Form II430R

1 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

430 RETROFIT INSTRUCTIONS1. Turn off recirculation pump if used. Close both check-stops by rotating stems counter-clockwise with an allenwrench. Open

Seite 2 - ADJUSTMENTS

Kommentare zu diesen Handbüchern

Keine Kommentare

Powers e430 Series Master Mixing Valves - Retrofit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Powers e430 Series Master Mixing Valves - Retrofit herunter. Powers e430 Series Master Mixing Valves - Retrofit User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Powers e430 Series Master Mixing Valves - Retrofit