Powers PowerStation XP Single and Multi-Valve Series - Tr Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Powers PowerStation XP Single and Multi-Valve Series - Tr herunter. Powers PowerStation XP Single and Multi-Valve Series - Triple Valve 1 - 416 gpm User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Description n
Capacity n
Triple Valve PowerStation
Capacity up to 416 gpm
Technical Instructions
IS-P-SF-TVPS
Advanced Thermal Activation
Maximum Operating Pressure ............................. 125psi (861 kPa)
Maximum Hot Water Temperature ...................... 200°F (93°C)
Minimum Hot Water Supply Temp.* ................... 5°F (3°C) above set point
Hot Water Inlet Temperature Range ................... 120 -180°F (49 - 82°C)
Cold Water Inlet Temperature Range ................. 40 - 80°F (4 - 27°C)
Minimum Flow** ...................................................... 0.5 gpm (1.89 lpm)
Temperature Adjustment Range *** ................... 90 - 160°F (32 - 71°C)
Listing/Compliance (Valves only) .......................... ASSE 1017, CSA B125
* With Equal Pressure
** Minimum flow when Hi/Lo is installed at or near hot water source recirculating tempered
water with a properly sized continuously operating recirculating pump.
*** Note: Low limit cannot be less than the cold water temperature. For best operation, hot
water should be at least 5°F (3°C) above desired set point.
Specifications n
Flow Capacity at 50-50 Mixed Ratio
Pressure Drop Across Valve
Model
Min. Flow
CV
5psi 10psi 20psi 30psi 45psi 60psi
to ASSE 1017
(34 kPa) (69 kPa) (138 kPa) (207 kPa) (310 kPa) (414 kPa)
SH1434TV and
LFSH1434TV
1 gpm
62.00
139 gpm 196 gpm 277 gpm 340 gpm 416 gpm 480 gpm
4 lpm 526 lpm 742 lpm 1049 lpm 1287 lpm 1575 lpm 1817 lpm
PowerStation
is a complete, fully assembled water tempering system,
designed to provide safe water throughout commercial and institutional
facilities. PowerStation
features the HydroGuard
®
XP MM430 or LFMM430
and SH1430 or LFSH1430 master tempering series valves which utilize
paraffin-based actuation technology to sense and adjust outlet temperature.
Each PowerStation
is mounted on heavy-duty, welded struts and factory
tested as a complete system. Each PowerStation
includes an engineer
specified circulator, GFCI outlet, combination temperature/pressure gauges
and Powers' triple-duty checkstops. Optional equipment includes an
Aquastat.
WARNING: TO ENSURE THE
ACCURATE AND RELIABLE
OPERATION OF THIS PRODUCT, IT IS
ESSENTIAL TO:
Properly size each valve based on the indi-
vidual application.
Properly design the recirculation system to
minimize pressure and temperature variations.
Conduct an annual maintenance program to
ensure proper operation of all critical com-
ponents.
THIS VALVE MUST BE USED IN
CONJUNCTION WITH TEMPERATURE
ACTUATED POINT-OF-USE DEVICES THAT
COMPLY WITH ASSE 1016, 1069, OR 1070.
FAILURE TO COMPLY WITH PROPER
INSTALLATION INSTRUCTIONS COULD
CONTRIBUTE TO VALVE FAILURE, RESULTING
IN IN JURY OR DEATH.
!
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - Technical Instructions

Description nCapacity nTriple Valve PowerStation™Capacity up to 416 gpmTechnical InstructionsIS-P-SF-TVPSAdvanced Thermal ActivationMaximum Operating

Seite 2 - 1434TV and LF1434TV

NOTE: Perform all 15 steps before moving on to the next section. Steps 1-15 are to set temperature of thermostatic valves and to set differential acr

Seite 3 - Legends n

Item Number Item Description Options Quantity Required1 Ball Valve Std 42 Thermostatic Valve See Order Code 13 Triple Duty Check Stop Std 64 Thermosta

Seite 4 - Preventative Maintenance n

USA:  Phone: 1.800.669.5430 • Fax 1.847. 229 . 0526 • www.powerscontrols.comCanada:  Phone: 1.888.208.8927 • Fax 1.888. 479.2887 • www.powerscontrols.

Kommentare zu diesen Handbüchern

Keine Kommentare